SPC-701 Set Point Controller

• Analog Input
• Snap Track Mount
• Analog Output
• DC Power In
• One Adjustable Output
• Form C Relay Output
• Feed Through Sensor Excitation Power
• WAGO Press Terminal Blocks

Specifications

1. Input: 24VDC, no sensor 30 mA, with sensor up to 2A.

2. Excitation Power: 24VDC up to 2A.

3. Analog Input: 0-20 mA, 4-20 mA, 0-10 VDC, 2-10 VDC

4. Signal Input Resistance: (Voltage Input 100K Ohms) (Current Input 250 Ohms)

5. Set Point Range: (0-10 VDC) (0-20mA)

6. Set Point Hysteresis 1%

7. Signal Averaging (Voltage Input 0-1s per volt) (Current Input 0-.5s per mA

8. Analog Output: 0-10VDC with load resistance 1K to infinity

9. Relay Contacts: (Resistive Load, 2A@277AC and 3A@ 30VDC/125VAC)

10. Relay Contacts: (Inductive Load, 1A@125VAC)

11. Relay Switching Min: (Current 10MA) Max (Voltage 30VDC/277VAC)

12. Operating Temperature Range: -25 to 70 C or -13 to 158 F

13. Humidity: 0 to 95% Non-Conducting

Terminals

Set Point Side

1. 0-20 mA In

2. 0-10 Volts In

3. 24 VDC out

4. GND (sensor ground)

5. Feed Thru

Relay Output Side

1. N.C. Relay Contact

2. N.O. Relay Contact

3. Relay Com

4. Feed Thru

5. +24 VDC Power In

6. GND (power ground)

7. 0-10 analog out