(888) 644-2876 (815) 338-5800
Migatron Corporation 935 Dieckman St. Woodstock, IL 60098 info@Migatron.com
The RPS-409A-IS is an intrinsically safe, analog ultrasonic sensor. It is a self-contained sensor in a 30mm PVC barrel housing. It is powered by 16-30VDC with reverse polarity protection. It also has a narrow beam angle, which enables it to get into tight places. A flat target can tilt up to 10 degrees and still be detected.
The RPS-409A-IS has a short circuit protected analog 0-10VDC output. Example using the RPS-409A-80-IS: The output is a linear .125 volts per inch. Therefore a target placed 10 inches from the sensor will result in an output of 1.25 volts. Likewise a target placed 80 inches from the sensor will result in an output of 10 volts.
The RPS-409A-IS has built in temperature compensation to provide accurate readings throughout the entire operating temperature range.
An LED indicator is provided. The LED is green when not detecting and changes to red when a target moves into place. The sensor is completely sealed and the connection is made by way of IP and NEMA rated cables.
Besides the input and output lines there is a sync/enable line. This can be used for connecting multiple sensors together to prevent cross-talk, or to trigger the sensor at a particular time.
The RPS-409A-IS is designed to take advantage of today's PLC and computer analog input cards. The numerical values that are programmed into the PLC or computer will determine the zero and span.
If a set point or set points are required in the application, look up the Migatron SPC-701, SPC-704, or M-1000 control products. Both the SPC-704 and M-1000 can also provide excitation power to drive the sensor.
MOUNTING CONSIDERATION
The performance of this sensor can be influenced by direct metal contact. This zone is 12mm/.50" measured from the sensor face. See "DIMENSIONS" drawing.
WIRING FOR INTRINSICALLY SAFE APPLICATIONS
UL listed intrinsically safe for use in hazardous (classified) locations when used with approved intrinsically safe barriers.
RPS-409A-40-IS RPS-409A-80-IS RPS-409A-144-IS* RPS-409A-216-IS*
4" to 40" 6 " to 80" 12" to 144" 12" to 216"
0 - 10 VDC Analog Output 0 - 10 VDC Analog Output 0 - 10 VDC Analog Output 0 - 10 VDC Analog Output
F32-5496302 F32-5496305 F33-5007728 F33-5007764
6' Cable 4-PIN, IP68 / NEMA-6P, 18 AWG 16' Cable 4-PIN, IP68 / NEMA-6P, 18 AWG Power Safety Barrier Analog Output & Sync / Enable Safety Barrier
Migatron Corp (888) 644-2876
Back To Top^
Migatron Is Your Total Solution For:
Intrinsically Safe Ultrasonic Level Sensors
Explosion Proof Ultrasonic Sensors
Level Control
Ultrasonic Level Sensors
Liquid Level Sensors
Tank Level Controls
Precision Measurement Sensor
Level Sensor
Close Range Sensors
Tank Level
Level Sensors
Liquid Level Sensor
Explosion Proof Ultrasonic Sensor
Intrinsically Safe Ultrasonic Level Sensor
Precision Measurement Sensors
Close Range Sensor
Sitemap For more information, please contact us online at info@migatron.com All images and information on this website is copyrighted by Migatron. (888) 644-2876
Website Design By WebItMaster.com
CLICK HERE
The
RPS-409A-IS has a short circuit protected analog
0-10VDC output. Example using the RPS-409A-80-IS:
The output is a linear .125 volts per inch.
Therefore a target placed 10 inches from the
sensor will result in an output of 1.25 volts.
Likewise a target placed 80 inches from the sensor
will result in an output of 10 volts.
