RPS-400-6 Close Range Sensor

CLICK HERE for an Acrobat version of this page.

Background Suppression Compact Size Quick Response Time Adjustable Sensing Range Detects translucent or opaque objects independent of color 20 to 30 VDC Power Input 2 to 6 Inch Sensing Range LED Indicator NPN Output Narrow Sensing Beam

The RPS-400-6 is a compact, high frequency sensor. It was introduced to the Migatron family of ultrasonic sensors to better meet the needs of the machine manufacturing industry. The RPS-400-6 can be used as a proximity sensor, or a level sensor.

This sensor has a wide array of application solutions not found in other proximity sensor technologies. The RPS-400-6 has an adjustable two to six inch sensing range with background suppression (meaning any object within the desired range is detected, while objects out of the desired range are ignored).

It cannot be affected by changes in target color or material. The RPS-400-6 is capable of detecting vibrating and/or tilting targets. A response time of no more than 2.1 ms and an operating frequency of 300 kHz makes the RPS-400-6 a repeatable and accurate high speed sensor.

The RPS-400-6 is a three wire NPN transistor output device. The transistor can switch 30VDC at 50 mA continuously. It has a molded VALOX case that is filled with epoxy potting material. The transducer face is made of white silicone. A six-foot cable comes standard with the RPS-400-6. Special cable lengths or connectors are also available for OEM applications.

Like all Migatron ultrasonic sensors, the RPS-400-6 is ideal for detecting clear objects. It’s ability to operate in dusty environments makes it ideal for rugged conveyors, PC board handling equipment, and fillers.

Proximity Detection

Proximity detection is the detection of an object in a given range. The detection range of the RPS-400-6 is controlled by the "Range Control" potentiometers located on the side of the sensor. Any object within the desired range is detected, while objects out of range are ignored (background suppression). The detect point is independent of size, material, and reflectivity.

Specifications:	RPS-400-6
Operational Range:	Adjustable 2" to 6"		Fig. A
Power Input:	20 - 30 VDC Reverse Polarity Protected
Input Current: Ambient Temperature	10 to 15 Milliamps 16 C to 41 C or 60 F to 105 F
Humidity: RPS-400-6 Housing: Output:	0 to 95% Non-Condensing VALOX case filled with epoxy potting Silicon rubber face NPN Open Collector transistor 30V max / 50mA continuous
Transducer Frequency:	300 kHz
Response Time:	.2ms min / 2.1 ms max
Weight of Controller:	2 ounces
Figure: A-Angle of Tilt B-Beam Spread C-Wiring Diagram - For RPS-400-6 D-Mounting Dimensions.			Fig. D
PART NUMBER	RANGE		OUTPUT
RPS-400-6	2" - 6"		NPN Open Collector Transistor (30V max / 50mA continuous)