(888) 644-2876
(815) 338-5800

Migatron Corporation
935 Dieckman St.
Woodstock, IL 60098
info@Migatron.com

Adjustment Procedure for RPS-401A & 426A

CLICK HERE to download the adjustment procedure for this product. 
Before starting adjustment procedure: Set P1 at full counter-clockwise and P2 at full clockwise. (These are 25 turn pots with a slip-clutch to allow for additional turns.) This will set the factory-default settings. The near point (P1) will be less than 4" or 8" and the far point (P2) will be greater than 40" or 80".
P1 Adjusts the near point
P2 Adjusts the far point		 P1 and P2 are identified on the label at the back of the sensor
Note: When adjusting, always adjust the near point first (P1), and then the far point (P2).
EXAMPLE NON-INVERTED: If the desired window for the 4-20mA output is 10" to 30", the following adjustment procedure should be followed:

1. Place the target at 10" and adjust P1 for 4mA (or slightly above).
2. Place the target at 30" and adjust P2 for 20mA.
3. Repeat steps 1 and 2 for a more precise adjustment if desired.
EXAMPLE INVERTED: If the desired window for the 4-20mA output is 10" to 30", the following adjustment procedure should be followed:

1. Short the white wire to plus. This inverts the 4-20mA output.
2. Place the target at 10" and adjust P1 for 20mA.
3. Place target at 30" and adjust P2 for 4mA.
4. Repeat steps 2 and 3 for a more precise adjustment if desired.
These two examples also apply to the voltage output (0-10v). In the case of inverting the voltage output, short the black wire to plus instead of the white wire.
 
 

 

 

 

 

 

 

 

 
 
 

Migatron Corp
(888) 644-2876

  

Back To Top^

Migatron Is Your Total Solution For:  

Intrinsically Safe Ultrasonic Level Sensors

Explosion Proof  Ultrasonic Sensors

Level Control

Ultrasonic Level Sensors

Sonic

Sensors Ultrasonic

Liquid Level Sensors

Tank Level Controls

Precision Measurement Sensor

Level Sensor

Close Range Sensors

Tank Level

Level Sensors

Liquid Level Sensor

Explosion Proof  Ultrasonic Sensor

Intrinsically Safe Ultrasonic Level Sensor

Liquid Level Sensors

Precision Measurement Sensors

Close Range Sensor

Intrinsically Safe Ultrasonic Level Sensors

Explosion Proof  Ultrasonic Sensors

Level Control

Ultrasonic Level Sensors

Liquid Level Sensors

Tank Level Controls

Precision Measurement Sensor

Level Sensor

Close Range Sensors

Tank Level

Level Sensors

Liquid Level Sensor

Explosion Proof  Ultrasonic Sensor

Intrinsically Safe Ultrasonic Level Sensor

Liquid Level Sensors

Precision Measurement Sensors

Close Range Sensor

Intrinsically Safe Ultrasonic Level Sensors

Explosion Proof  Ultrasonic Sensors

Level Control

Ultrasonic Level Sensors

Liquid Level Sensors

Tank Level Controls

Precision Measurement Sensor

Level Sensor

Close Range Sensors

Tank Level

Level Sensors

Liquid Level Sensor

Explosion Proof  Ultrasonic Sensor

Intrinsically Safe Ultrasonic Level Sensor

Liquid Level Sensors

Precision Measurement Sensors

Close Range Sensor


Sitemap
For more information, please contact us online at info@migatron.com
All images and information on this website is copyrighted by Migatron. (888) 644-2876

Website Design By WebItMaster.com